Skip to main content

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: Testing Techniques: Original vs Remaster (Read 8550 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Testing Techniques: Original vs Remaster

Hi,

I'm wondering what the best techniques are to test how different a recording is. I have an album that claims to be a remaster, but to my ears it sounds no different to the original. What software can I use to compare the two audio files and measure their percentage difference, much like the diff command on linux.

Thanks guys,


sabrehagen

Testing Techniques: Original vs Remaster

Reply #1
Hi,

I'm wondering what the best techniques are to test how different a recording is. I have an album that claims to be a remaster, but to my ears it sounds no different to the original. What software can I use to compare the two audio files and measure their percentage difference, much like the diff command on linux.

Thanks guys,


sabrehagen


Audio Diffmaker might help , if they aren't *too* different. 

http://www.libinst.com/Audio%20DiffMaker.htm

Testing Techniques: Original vs Remaster

Reply #2
Hi,

I'm wondering what the best techniques are to test how different a recording is. I have an album that claims to be a remaster, but to my ears it sounds no different to the original. What software can I use to compare the two audio files and measure their percentage difference, much like the diff command on linux.

Thanks guys,


sabrehagen


Audio Diffmaker might help , if they aren't *too* different. 

http://www.libinst.com/Audio%20DiffMaker.htm

Okay thanks, I've used that one before, just wondering if there were any alternatives.

Testing Techniques: Original vs Remaster

Reply #3
Ugh, the golden test to determine (audible) differences here, is ABX testing.

Testing Techniques: Original vs Remaster

Reply #4
Yeah, percentages aren’t going to have any useful correlation with quality. Even after you account for differing offsets or whatever and are lucky enough not to be completely confounded by samping drift in the case of transfers from analogue, etc.

If you can’t hear a difference, accept that as your conclusion.

But if you insist upon going beyond audibility, there are a number of far, far more useful metrics that can describe physical differences between two streams.

Edit: I just noticed where this thread was posted. If you decide to conduct some more listening tests, feel free to request it to be moved back, but until then, a thread about using measurements instead clearly does not belong in Listening Tests.

Testing Techniques: Original vs Remaster

Reply #5
Quote
Okay thanks, I've used that one before, just wondering if there were any alternatives.

I do like Masvis : this soft does a very good analysis of masterings and can be used to compare tracks : levels, bits used, clippings, dynamics,...

Testing Techniques: Original vs Remaster

Reply #6
Ugh, the golden test to determine (audible) differences here, is ABX testing.


Sure, I agree with that. The reason I was looking for a software comparison was to see if I had exactly the same file, except one was called 'original' and one was called 'remaster'. It was more to test a false labeling of the track information.

Testing Techniques: Original vs Remaster

Reply #7
while masvis focusses on crest factor,
wavdiff will show the exact differences between 2 wav files.

Testing Techniques: Original vs Remaster

Reply #8
Quote
while masvis focusses on crest factor, wavdiff will show the exact differences between 2 wav files.

As an example, here are 3 versions of PinkFloyd, DSOTM, Money analysed wtith Masvis and wavdiff (last picture).
For me the analysis with Masvis is easier (wavdiff is only with commandline), more convenient to read and gives more information on the differences. When I compare masterings, I want to know if compression has been used, if there are overFS, if some EQ has been done, etc....those things I can read from Masvis analysis, not easily from wavdiff (or maybe I missed something).
Note that I had to convert my FLACs to wav so wavdiff can read it.







Concerning AudioDiffmaker and wavdiff, computing the difference between two files and then listening to it is generally not a good idea for our purpose : some many differences just come from diference of timings or phase differences and are difficult to avoid. An audibility of the difference file is no proof of audibility of difference between the source files (only an ABX will help, as skamp told).