IPB

Welcome Guest ( Log In | Register )

Help on how to EQ a 1980s Eastern European record?, Romanian, 1988, to be specific.
_if
post Jan 26 2013, 00:03
Post #1





Group: Members
Posts: 75
Joined: 18-December 10
From: Ohio
Member No.: 86607



I have a record I want to digitize, Bună Seara, Iubito! by Loredana Groza, released in Romania in 1988, so just slightly before the end of Communism and I expect the adoption of the RIAA standard. The RIAA EQ clearly sounds wrong with it too much bass, not enough treble and what little information I could find from searching indicates that CCIR was the EQ curve used in Eastern Europe at the time. Assuming this is right (and hopefully it is), does anyone have any ideas of how to get this to sound right, preferably without having to buy a 1980s vintage Eastern European receiver? I can EQ it by ear and make it sound good, but I'd like it to be closer to correct than that. Google turns up nothing for a phono preamp with CCIR built in. Maybe somebody has CCIR specifications I could mimic? Fingers crossed it's not some Romania-only, or worse, single company-only, modification to the curve.
Go to the top of the page
+Quote Post
 
Start new topic
Replies
Jason43
post Jan 26 2013, 03:04
Post #2





Group: Members
Posts: 4
Joined: 26-November 11
From: England, UK
Member No.: 95411



Hello _if, I'm a newbie of sorts having never posted a question or replied to one before, but I have been lurking on the forum for quiet some time. To the mods: If any links contained in answer break the rules, please feel free to amend them. I have been careful to only suggest freeware applications.

I am particularly interested in analogue to digital conversions and have encounted similar problems to the one described by the op.

I think you might find this Equalisation package by Brian Davies useful, It has a large number of equaliser settings. It is freeware and you can get it from here: http://www.clickrepair.net/software_info/equaliser.html

It will allow you to reverse the RIAA equalisation of the phono-amp and apply the required CCIR in software.

You basically use the software in conjunction with a audio editor eg: Audacity, just export a WAV (ideally a 32-bit floating WAV) file, process it through Brian's Equaliser and the re-import it into your preferred audio editor for further processing.

You can get the manual, which is pretty informative on the topic, from here: http://www.clickrepair.net/software_info/equalizer.html
Go to the top of the page
+Quote Post
Jason43
post Jan 26 2013, 23:56
Post #3





Group: Members
Posts: 4
Joined: 26-November 11
From: England, UK
Member No.: 95411



QUOTE (Jason43 @ Jan 26 2013, 02:04) *
Hello _if, I'm a newbie of sorts having never posted a question or replied to one before, but I have been lurking on the forum for quiet some time. To the mods: If any links contained in answer break the rules, please feel free to amend them. I have been careful to only suggest freeware applications.

I am particularly interested in analogue to digital conversions and have encounted similar problems to the one described by the op.

I think you might find this Equalisation package by Brian Davies useful, It has a large number of equaliser settings. It is freeware and you can get it from here: http://www.clickrepair.net/software_info/equaliser.html

It will allow you to reverse the RIAA equalisation of the phono-amp and apply the required CCIR in software.

You basically use the software in conjunction with a audio editor eg: Audacity, just export a WAV (ideally a 32-bit floating WAV) file, process it through Brian's Equaliser and the re-import it into your preferred audio editor for further processing.

You can get the manual, which is pretty informative on the topic, from here: [url="http://www.clickrepair.net/downloads/EQversions.pdf[/url]

Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 26th November 2014 - 17:14