IPB

Welcome Guest ( Log In | Register )

Sample rates and resampling questions
androdion
post Nov 10 2012, 14:04
Post #1





Group: Members
Posts: 18
Joined: 10-November 12
Member No.: 104434



Hi. I have a few questions which involve sample rates and resampling. I have a Xonar Essence STX as a sound card on my PC and I've been trying to learn a few more things about the best possible settings on its control panel. With that being said some doubts and questions have arisen, and the Internet is not being exactly friendly in my pursuit for a direct answer.

So my main question right now is if putting the sample rate on the Xonar control panel to 192Khz will make it resample any signal lower than that to 192Khz, or, if by putting the sample rate defined as 192Khz if it will reproduce every sound within that spectrum without resampling it.

For instance, I know that CD audio is 44Khz. Will it change the sound output in any way if I have the sample rate on the Xonar defined as 192Khz as opposed to 44Khz? This for a 2.1 system playing an audio CD. Does resampling to 192Khz occur in this situation or will the Xonar detect a sample rate within the available spectrum and play it accordingly? This is something that's been bugging me because everyone says that the sample rate on the Xonar should be set accordingly to the source of the sound (CD/DVD/whatever) but no one actually answers this simple question directly. Also, does the Windows 7 sample rate need to be set to any value or does the Xonar control panel override it? Having the option "Allow applications to take exclusive control of this device" selected means that I don't need to worry about which settings are defined on Windows?

One other thing, I've been reading that on the Mixer tab on the control panel 76% volume is the default for 0dB and that putting it any higher than that will cause a digital gain that could cause distortion. Is this true? Is there any difference between the 75 and 76% settings at all? Because strangely if I put it to 75 it will reset itself to 76, but if I choose a lower value (say 50%) it will be set as that.

And since we're on the Xonar subject I might as well ask. On the FlexBass tab, is there any threshold value to the LFE Crossover Frequency? What I mean is, is there any value here that's "too high" and should only be set up to a certain limit?

Thanks everyone for the patience and please help me out here. smile.gif
Go to the top of the page
+Quote Post
 
Start new topic
Replies
dhromed
post Nov 10 2012, 14:58
Post #2





Group: Members
Posts: 1337
Joined: 16-February 08
From: NL
Member No.: 51347



Disclaimer: I have a Xonar DG on XP. Your mileage may vary.

Yes, it will resample to the sample rate you specify. Whether this at all audible is another matter. I keep it at 44.1.

QUOTE
I've been reading that on the Mixer tab on the control panel 76% volume is the default for 0dB

The manual I've got says the exact opposite. The sliders operate on a percentage of full-scale, that is, 100 = 0dBFS.

The Xonar driver has this weird behaviour where it thinks there might be clipping and then lowers the volume accordingly for a second. If you set the volume to 100% on every slider, the driver's limiter is pretty much guaranteed to activate, and your sound will become wobbly and have slightly reduced punch. My previous soundcard was a Realtek onboard that I blew up, which didn't have this behaviour. I never experienced any clipping distortion either, so for now I'm going to put this on the Xonar driver being overly cautious.

The default settings, however, should be that the Left and Right slider in the mixer are at about 75%, and the main turning button on the interface at 50%. You should probably leave this as is, or experiment. Of course, if you're not hearing anything funny at all: don't worry about it! smile.gif

QUOTE
On the FlexBass tab, is there any threshold value to the LFE Crossover Frequency?


Only if you're hearing distortion from your 2 satellite speakers. The slider exists because every speaker setup is different, so you should play around. It's possible that nothing needs to be done.

This post has been edited by dhromed: Nov 10 2012, 14:59
Go to the top of the page
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 27th November 2014 - 04:17