IPB

Welcome Guest ( Log In | Register )

Vinyl Care & Dust Removal, How to make vinyl sound good??
ViPER1313
post May 4 2003, 20:11
Post #1





Group: Members
Posts: 271
Joined: 19-August 02
From: Maryland
Member No.: 3109



After reading the thread found here [ http://www.hydrogenaudio.org/forums/index....t=7953&hl=vinyl ] I was blown away by the recording quality of the sandra.mpc sample. How do you get vinyl to sound so dust free and rich? All the vinyl that I have recorded has at least some dust crackling in the background, and some recordings sound extremely harsh (especially in the vocals - almost like clipping except there is no clipping going on.....) Do you use digital correction? Filtering? I use the following equipment -

Marantz TT1060 Turntable w/ unknown cartridge/needle (the cartridge/needle are replacements, less than 6 months old - I have no idea what brand / model they are, but they seem to be of decent quality.)

Marantz PM325 Receiver

SB-Live soundcard fed from phono -> receiver -> line-in (This is not the weak link I am concerned over - I know it has crappy quality recording, but I am worried about the record playback quality itself . I have also tried phono -> line-in directly and was not impressed with the quality at all.)

The cartridge seems to have good frequency response and be of decent quality, but I can not get rid of dust no matter what I try - I have a diskwasher and have tried a 1:5 alcohol/water solution, but the dust persists. Any tips?
Go to the top of the page
+Quote Post
 
Start new topic
Replies
Continuum
post May 7 2003, 18:48
Post #2





Group: Members
Posts: 473
Joined: 7-June 02
Member No.: 2244



QUOTE (vraxoin @ May 6 2003 - 07:34 PM)
Regarding wet playback and other things, here is a page that you may find interesting: (I guess the site's now down, so it's Google Archived only)

How to Clean

From the link:
QUOTE
Playing records 'wet'.
a) DON'T! - during playback the stylus and groove does in fact heat up a bit, and this is essential for the vinyl to be able to flex when the stylus can't really follow the groove. IF you cool the pickup by using the Lencoclean wet play back device, then mistracking (it always happens, cutting heads always can and will cut more than any pickup can track on playback) will lead to a chipping type damage of the groove wall that is irreversible instead of the usual recoverable bending.

Could someone elaborate on this? I find it hard to understand and harder to believe. The second explanation he gives sounds more reasonable to me.
Go to the top of the page
+Quote Post

Posts in this topic
- ViPER1313   Vinyl Care & Dust Removal   May 4 2003, 20:11
- - Pio2001   QUOTE Do you do digital correction? Filtering? No...   May 4 2003, 23:31
- - vraxoin   The brushes from the Discwasher kits are designed ...   May 5 2003, 21:47
- - ViPER1313   Thanks for the advice! I think I need to buy a...   May 6 2003, 01:40
- - Continuum   What do you think about playing wet? I recall to h...   May 6 2003, 06:56
- - Pio2001   Good.mpc sounds technically perfect, though I don...   May 6 2003, 14:21
- - 2Bdecided   1 thing to add: dust.mpc has a loud LF tone/noise ...   May 6 2003, 15:24
- - Lev   QUOTE What do you think about playing wet? I recal...   May 6 2003, 15:30
- - ViPER1313   By: Pio2001 (Posted on May 6 2003 - 09:21 AM) QUOT...   May 6 2003, 16:40
- - vraxoin   Regardless of EQ being used, the "good" ...   May 6 2003, 18:34
- - Pio2001   QUOTE Bass was probably set to +0db, midrange was ...   May 6 2003, 19:29
- - ViPER1313   QUOTE The tone settings on the ampli should not af...   May 7 2003, 05:49
- - boojum   QUOTE (Continuum @ May 5 2003 - 09:56 PM)What...   May 7 2003, 06:03
- - ViPER1313   Here is a sample using the PM325's tape output...   May 7 2003, 06:51
- - 2Bdecided   That one sounds fine to me. I'd just do some g...   May 7 2003, 11:32
- - Continuum   QUOTE (vraxoin @ May 6 2003 - 07:34 PM)Regard...   May 7 2003, 18:48
- - Continuum   QUOTE (boojum @ May 7 2003 - 07:03 AM)Soon yo...   May 7 2003, 18:54
- - nmpaulcp   I start with products from www.lastfactory.com (so...   May 20 2003, 01:05
|- - Shamray   QUOTE (nmpaulcp @ May 20 2003, 01:05) I s...   Apr 6 2011, 09:29
- - DVDdoug   What software? DCART32? Does the documentation s...   Apr 6 2011, 18:20
- - cyberdux   For dust and grime removal: Vaccuum LP cleaners ...   Apr 7 2011, 02:13
|- - cliveb   QUOTE (cyberdux @ Apr 7 2011, 02:13) Vacc...   Apr 7 2011, 08:53
- - Apesbrain   This is a great site for an assortment of relative...   Apr 7 2011, 17:38


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 27th December 2014 - 19:10