IPB

Welcome Guest ( Log In | Register )

Vinyl Care & Dust Removal, How to make vinyl sound good??
ViPER1313
post May 4 2003, 20:11
Post #1





Group: Members
Posts: 271
Joined: 19-August 02
From: Maryland
Member No.: 3109



After reading the thread found here [ http://www.hydrogenaudio.org/forums/index....t=7953&hl=vinyl ] I was blown away by the recording quality of the sandra.mpc sample. How do you get vinyl to sound so dust free and rich? All the vinyl that I have recorded has at least some dust crackling in the background, and some recordings sound extremely harsh (especially in the vocals - almost like clipping except there is no clipping going on.....) Do you use digital correction? Filtering? I use the following equipment -

Marantz TT1060 Turntable w/ unknown cartridge/needle (the cartridge/needle are replacements, less than 6 months old - I have no idea what brand / model they are, but they seem to be of decent quality.)

Marantz PM325 Receiver

SB-Live soundcard fed from phono -> receiver -> line-in (This is not the weak link I am concerned over - I know it has crappy quality recording, but I am worried about the record playback quality itself . I have also tried phono -> line-in directly and was not impressed with the quality at all.)

The cartridge seems to have good frequency response and be of decent quality, but I can not get rid of dust no matter what I try - I have a diskwasher and have tried a 1:5 alcohol/water solution, but the dust persists. Any tips?
Go to the top of the page
+Quote Post
 
Start new topic
Replies
Pio2001
post May 6 2003, 14:21
Post #2


Moderator


Group: Super Moderator
Posts: 3936
Joined: 29-September 01
Member No.: 73



Good.mpc sounds technically perfect, though I don't like the sound of the cartridge very much.
Dust.mpc is correct too.
Harsh.mpc is completely worn out. I experienced this kind of sound in various situations :

-On worn stylii, comparing a CD recording of a vinyl to a playback of the same vinyl on an audiophile turntable with an old stylus (Rega Planar 3 + Denon DL-110).
-On dusty stylii, when a vinyl is not clean, some dust and fibers accumulate on the tip, until it looks like a cloud of dust instead of a tip. My father has a record that spreads dust on tips, no matter the time we spend with the carbon brush with it. The cleaning liquid would be appropriate for this record.
-When the tracking force is too weak. However it's not exactly the same kind of sound. Too weak a tracking force suggests rather a "crackling" sound than a "fuzzy" sound, if you see what I mean. Like walking on rocks rather than sand...
-When the turntable/cartridge are not good enough, however, only hi-hat sounds are affected in this case. In your sample, all sounds are affected.
-When the record is worn out. I guess it's your case.

I don't know if a good turntable/cartridge set can make a difference reading worn records.
Go to the top of the page
+Quote Post

Posts in this topic
- ViPER1313   Vinyl Care & Dust Removal   May 4 2003, 20:11
- - Pio2001   QUOTE Do you do digital correction? Filtering? No...   May 4 2003, 23:31
- - vraxoin   The brushes from the Discwasher kits are designed ...   May 5 2003, 21:47
- - ViPER1313   Thanks for the advice! I think I need to buy a...   May 6 2003, 01:40
- - Continuum   What do you think about playing wet? I recall to h...   May 6 2003, 06:56
- - Pio2001   Good.mpc sounds technically perfect, though I don...   May 6 2003, 14:21
- - 2Bdecided   1 thing to add: dust.mpc has a loud LF tone/noise ...   May 6 2003, 15:24
- - Lev   QUOTE What do you think about playing wet? I recal...   May 6 2003, 15:30
- - ViPER1313   By: Pio2001 (Posted on May 6 2003 - 09:21 AM) QUOT...   May 6 2003, 16:40
- - vraxoin   Regardless of EQ being used, the "good" ...   May 6 2003, 18:34
- - Pio2001   QUOTE Bass was probably set to +0db, midrange was ...   May 6 2003, 19:29
- - ViPER1313   QUOTE The tone settings on the ampli should not af...   May 7 2003, 05:49
- - boojum   QUOTE (Continuum @ May 5 2003 - 09:56 PM)What...   May 7 2003, 06:03
- - ViPER1313   Here is a sample using the PM325's tape output...   May 7 2003, 06:51
- - 2Bdecided   That one sounds fine to me. I'd just do some g...   May 7 2003, 11:32
- - Continuum   QUOTE (vraxoin @ May 6 2003 - 07:34 PM)Regard...   May 7 2003, 18:48
- - Continuum   QUOTE (boojum @ May 7 2003 - 07:03 AM)Soon yo...   May 7 2003, 18:54
- - nmpaulcp   I start with products from www.lastfactory.com (so...   May 20 2003, 01:05
|- - Shamray   QUOTE (nmpaulcp @ May 20 2003, 01:05) I s...   Apr 6 2011, 09:29
- - DVDdoug   What software? DCART32? Does the documentation s...   Apr 6 2011, 18:20
- - cyberdux   For dust and grime removal: Vaccuum LP cleaners ...   Apr 7 2011, 02:13
|- - cliveb   QUOTE (cyberdux @ Apr 7 2011, 02:13) Vacc...   Apr 7 2011, 08:53
- - Apesbrain   This is a great site for an assortment of relative...   Apr 7 2011, 17:38


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 26th November 2014 - 01:38