Skip to main content

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: Are high sample rates better for DSP? (Read 20368 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Are high sample rates better for DSP?

Reply #25
Thanks Drew for some hard evidence. Can you explain in layman's terms what the difference is between the two files after applying the same EQ? From the partial graph it looks like there's more boost at 10 KHz, but that doesn't seem right.


The 192kHz (orange) was about +6dB on the spectrum analyzer before the EQ was applied. I turned off the pre-EQ snapshots to make things easier to see, but they were essentially straight lines ~6dB apart.

Basically, the 2 curves are quite different at >15kHz, but you can also see the Q at 10kHz is a little different as well. For the part below 6kHz (covered by the EQ) they appear identical (~6dB apart).

So it's just a somewhat different EQ curve being applied in this case.

And you might note that the 48kHz curve in the analyzer arguably looks more like the curve in the EQ GUI anyway. 

Are high sample rates better for DSP?

Reply #26
I'm guessing these are the reasons why A/V receivers and such oversample for DSP?

 

Are high sample rates better for DSP?

Reply #27
The 192kHz (orange) was about +6dB on the spectrum analyzer before the EQ was applied. I turned off the pre-EQ snapshots to make things easier to see, but they were essentially straight lines ~6dB apart.

Great, thanks for clarifying.

Quote
And you might note that the 48kHz curve in the analyzer arguably looks more like the curve in the EQ GUI anyway. 

LOL.

Thanks to all for a very informative discussion. I think I have the correct answer now.

--Ethan
I believe in Truth, Justice, and the Scientific Method