Skip to main content ↑ ↓

Notice

Please note that most of the software linked on this forum is likely to be safe to use. If you are unsure, feel free to ask in the relevant topics, or send a private message to an administrator or moderator. To help curb the problems of false positives, or in the event that you do find actual malware, you can contribute through the article linked here.
Topic: Rockboxed Sansa Clip+, how can I change the USB mode? (Read 7452 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Rockboxed Sansa Clip+, how can I change the USB mode?

Hi,

hmm, I've updated my Clip+ with Rockbox. In order to do this, I had to change it to MSC usb mode. Now it's rockboxed, but Windows7 does not detect the hardware correctly. I think I need to change it to mtp mode again (this way I'd see 2 drives as I was used to) - but how? I cannot find an usb mode option in Rockbox. The old firmware does not start, for whatever reason. (it was rockboxed before, but when the clip+ was attached to load batteries, the original bootloader started).

TIA

Rockboxed Sansa Clip+, how can I change the USB mode?

Reply #1 –
Got it. I want MSC mode and the only way to boot into original firmware is pressing "|<<" while turning the device on.

Rockboxed Sansa Clip+, how can I change the USB mode?

Reply #2 –
It's all in the manual on the rockbox website
 

Rockboxed Sansa Clip+, how can I change the USB mode?

Reply #3 –
Quote from: Squeller on
Got it. I want MSC mode and the only way to boot into original firmware is pressing "|<<" while turning the device on.


FWIW, newer rockbox builds have USB support, so rebooting should be unnecessary after you update.